Self Priming Screw Pump
video
Self Priming Screw Pump

Self Priming Screw Pump

Mostly this self priming screw pump is horizontal installation with compact structure and reliable performance. Max flow rate 500m3/h and max pressure 2.4MPa. It can handle viscous liquids especially liquids with high viscosity difficult to be pumped, different dense liquids.
Send Inquiry
Description

Mostly this self priming screw pump is horizontal installation with compact structure and reliable performance. Max flow rate 500m3/h and max pressure 2.4MPa. It can handle viscous liquids especially liquids with high viscosity difficult to be pumped, different dense liquids. Those mainly are applied in environmental engineering, paper making industry, mine industry, chemical industry and pharmaceutical industry, oil industry.

 

1. Driving by diesel engine, 20-2000KW

2. Diesel engine cooling type: air cooled or water cooled

3. Semi-open impeller, single stage single suction, horizontal shaft position, centrifugal water pump

4. Seal type: mechanical

5. High elastic coupling direct connection, or by belt and pulley

6. Rotation speed 750-3000rpm

7. Optional accessory: wheel trailer, engine weather canopy, ATS Ctrl panel, preheating system, vacuum assistant system, hanging framework, whole container covered, floating model, submersible equipment.

8. Country of origin: Weifang city, Shandong Province, China

9. HS code: 8413709990 8413609090

 

1
Operation attention

 

1. Before operation,read user's manual of diesel engine,water pump,CTRL cabinet.

2. Preparations not ready,not allowed to start engine.

3. Pay attention to fire.Open fire can not reach the working machine.If fire materials existed,equip fire extinguishers on the exhaust pipe.

4. During working,disassembling is forbidden,operator would not allow for leave the spot.

5. Forbidden running when no oil pressure,low oil pressure,over temperature,over speed,abnormal noises.If so,stop and check the machine.

6. Once diesel engine running out of control,stop immediately.If stop button failed,block up the air intake pipe of the engine.

7. No water running pump is forbidden.

8. Before start pump,crank the pump to make sure smooth rotation.

9. If abnomal noises or vibration,stop and check engine.

10. During cold seasons,drain water in the tank and pump to avoid frozen damages.

 

Reference picture of self priming screw pump

product-800-800

product-800-800

product-800-800

product-800-800

Hot Tags: self priming screw pump, China self priming screw pump manufacturers, factory, non clogging mine slurry pump, self priming diaphragm pump, quarry dewatering pumps, diesel water pump for agriculture, Self Priming Chemical Pump, vertical self priming monoblock pump

Send Inquiry

(0/10)

clearall